EX07 · Microsatellite baseline¶
Examples index · Console starter catalog
Run this example¶
- Open Configure → Load Example. Choose EX07 · Microsatellite baseline.
- Name the project and run. Keep the starter inputs unchanged for your first run.
- Study → Generate CAD is Enabled by default. The server needs a compatible FreeCAD runtime for CAD export; native sizing can run without it.
- Validate the inputs, run the study, and follow the active stage in the run monitor.
- Open the completed run and inspect the results described below.
Use access and setup if you need a compatible runtime. First Console run illustrates the common loading, validation and execution steps.
Study and results¶
Choose EX07 · Microsatellite baseline: an 18 kg payload with 90/150 W demand, a 255 m/s chemical-propulsion allocation, explicit ADCS hardware and a flat deck. The environment uses a representative 75° beta angle.
Inspect the mass, power and propulsion budgets, then the CAD model under Spacecraft and the launch assessment. Use System sizing and convergence to trace how coupled budgets settle. EX01 uses the same inputs through the CLI. EX10 deliberately reuses this flat-deck baseline as the first half of its topology trade. The 2.0 × 0.8 × 1.2 m bus is a generous integration reference, not a compactness optimum. Hide the outer envelope to inspect explicit decks, harness cutouts and equipment; proxy occupancy does not count every installation detail.
Read the engineering assessments alongside the budgets. A complete score or a CAD export does not establish flight qualification; see Evidence and limits.