EX09 · Larger-bus study¶
Examples index · Console starter catalog
Run this example¶
- Open Configure → Load Example. Choose EX09 · Larger-bus study.
- Name the project and run. Keep the starter inputs unchanged for your first run.
- Study → Generate CAD is Enabled by default. The server needs a compatible FreeCAD runtime for CAD export; native sizing can run without it.
- Validate the inputs, run the study, and follow the active stage in the run monitor.
- Open the completed run and inspect the results described below.
Use access and setup if you need a compatible runtime. First Console run illustrates the common loading, validation and execution steps.
Study and results¶
EX03 is the CLI route to this same 80 kg, 25/50 W payload study. The historical source name includes low-kw; the maintained lesson is larger-payload integration, not a continuous kilowatt payload. The 2.0 × 0.8 × 1.2 m reference bus is not volume optimized.
Choose EX09 · Larger-bus study: an 80 kg payload with a 120 m/s electric-propulsion allocation at a representative 60° beta angle. This is a larger-payload example, not a kilowatt load case.
Inspect Power, Mass and Evaluation, and use the CAD model to relate those budgets to the physical assembly. Read Mass and mass properties for the distinction between scalar totals and state-specific properties. Differences from EX07/EX08 include several inputs, so they are not controlled trades.
Read the engineering assessments alongside the budgets. A complete score or a CAD export does not establish flight qualification; see Evidence and limits.