Skip to content

EX05: diagnose a launch-width failure

All examples and learning routes

This example isolates one fault: the available launch width is too small for the spacecraft. It uses the same inputs as EX12. The calculation should complete, required equipment should be placed, and CAD should match the geometry, while the launch assessment fails and the overall evaluation remains ineligible.

Run the diagnostic

Download EX05, extract it and run from EX05:

sindri validate-project baseline/study.yaml
sindri run baseline/study.yaml --output-root runs/diagnostic

A crash, timeout or missing upstream result is not the expected outcome. Check the lifecycle and Launch results before following this guide.

Trace the failure

Open Launch and find check.launch.geometry.v: the stowed spacecraft width exceeds the 0.6 m custom launch envelope. Placement checks accommodation inside the spacecraft bus; successful internal placement does not prove that the whole spacecraft fits its launcher. The exported model is useful evidence of that distinction, not an acceptance certificate.

The custom envelope is an illustrative constraint, not a supplier-certified accommodation product. Its other dimensions are 3.2 m and 1.6 m.

Make the controlled repair

Copy the inputs and change only:

launch_accommodation:
  allowed_envelope_ids: []
  explicit_envelope:
    maximum_x_m: 3.2
    maximum_y_m: 1.8
    maximum_z_m: 1.6

Only maximum_y_m changes, from 0.6 m to 1.8 m. This is exactly the shipped EX13 · Corrected packaging baseline. Run the copy under a different output root and compare the input diff and launch checks. The mission, hardware, topology, operating assumptions and seed are identical.

This demonstrates choosing adequate accommodation for a fixed spacecraft. It does not solve the different problem of keeping the original 0.6 m requirement; that would require a new spacecraft redesign and validation.

Verified results

Successful execution and failed launch assessment beside the stowed and available widths.

Open figure at full size

All selected calculations finish, but the stowed spacecraft exceeds the available launch width. EX13 changes only that width from 0.6 m to 1.8 m; placement completeness alone does not establish launch accommodation.

The following values are generated from the verified observations. Read the assessment states before treating any reported quantity as a usable design budget.

baseline — run lifecycle: completed.

Quantity Observed value Unit
Stowed width 0.84 m
Available launch width 0.6 m

Full result states, diagnostics and provenance.

Use Investigate issues for the broader evidence workflow. Return to the examples index or run the EX13 repair.