Skip to content

EX08 · Compact electric spacecraft

Examples index · Console starter catalog

Run this example

  1. Open Configure → Load Example. Choose EX08 · Compact electric spacecraft.
  2. Name the project and run. Keep the starter inputs unchanged for your first run.
  3. Study → Generate CAD is Enabled by default. The server needs a compatible FreeCAD runtime for CAD export; native sizing can run without it.
  4. Validate the inputs, run the study, and follow the active stage in the run monitor.
  5. Open the completed run and inspect the results described below.

Use access and setup if you need a compatible runtime. First Console run illustrates the common loading, validation and execution steps.

Study and results

Choose EX08 · Compact electric spacecraft: a 5 kg payload with 20/35 W demand, a 60 m/s electric-propulsion allocation, body-mounted panels and a 0.9 × 0.7 × 0.7 m bus at a representative 75° beta angle.

Review propulsion demand alongside the power budget, then inspect Spacecraft and Evaluation. The compact reference hardware section explains the thruster and integration assumptions. This is a small spacecraft concept, not a claim that the full design fits a CubeSat envelope.

Compact reference hardware

The electric starter retains propulsion rather than deleting the maneuver. propulsion.reference-nano-hall-v2 represents a 2 mN, 800 s, 60 W xenon Hall system: 0.50 kg thruster, 1.00 kg balance of system and the existing 0.55 kg tank, for 2.05 kg before propellant. It is explicitly selected; automatic hardware selection does not silently substitute this reference for existing designs.

The performance scale is informed by Exotrail's published nano-thruster results. The integration mass, envelope, duty limits, thermal dissipation and feed assumptions are Sindri engineering estimates. The reference is not a supplier product model. Detailed assumptions are maintained with the propulsion example in configs/examples/propulsion_v2/README.md.

The legacy catalog cost range for the propulsion reference is also an engineering estimate, not a supplier quote.

The starter uses the existing microsatellite PCDU to accommodate safe-mode heaters and battery recharge: the conservative safe-mode load is about 400 W, above the nanosatellite PCDU's 150 W continuous/250 W peak ratings. The 900 Wh, 15 kg battery is conservative. A 160 Wh candidate closed the electrical trial but fell into a gap between the catalog separation systems' mass/interface ratings. It is not silently substituted as a qualified repair. EX02 uses these same inputs through the CLI. This remains a small-spacecraft concept, not a CubeSat packaging claim.

Both fixed panels use an explicit 9:7 aspect ratio matching the 0.9 × 0.7 m side faces. This accommodates the area required by the selected hardware loads without changing the bus, battery or mission. The former default proportions are retained as a failing placement regression.

Read the engineering assessments alongside the budgets. A complete score or a CAD export does not establish flight qualification; see Evidence and limits.

Next: EX09 · Larger-bus study · All examples